Zanussi · Washing machines · Error code

E41 Washing machine error code

What E41 means on Zanussi washing machines, what Zanussi says causes it and what to do, with the models it is documented for.

Source: Zanussi error code page, retrieved 3 Nov 2026 Verified

All Zanussi codes
In short

On Zanussi washing machines, error code E41 means: Issue: Washing machine displays error message E40 or E41, or emits 4 beeps / 4 flashes Error codes E41, E42, E43, E44 and E45 on the washing machine. Recommended action: Issue (2 steps), then applies to (2 steps); the steps are below. Zanussi documents it for Zanussi washing machines generally.

What E41 means

Washing machine displays error message E40 or E41, or emits 4 beeps / 4 flashes Error codes E41, E42, E43, E44 and E45 on the washing machine Front-loading washing machine / washer-dryer Top-loading washing machine Error codes E40 and E41 indicate that the washing machine door or lid is not properly closed or detected. This safety feature prevents the appliance from starting a cycle when the door is not securely locked. Follow these troubleshooting steps to resolve the issue: Make sure the door is fully closed. Clothing stuck between the door seal and glass can prevent proper closure. Overloading can stop the door from locking correctly. If your appliance has a mechanical child lock, it may prevent the door from operating properly. If the error code E40 or E41 persists after performing the steps above: Contact an Authorised Service Centre for safe and reliable service. Whether your appliance is in or out of warranty, we're here to guide you to the right repair solution.Book a service Why does my washing machine show error code E40?The door is not closed, locked, or recognised as locked. Can laundry prevent the door from locking?Yes, trapped laundry can stop the door from closing correctly. Can a damaged door latch cause E40?Yes, a worn or damaged latch can prevent locking. Why won't the programme start?The washing machine cannot start if the door is not securely locked. Is it normal for the door to remain locked after a wash cycle?Yes, the door may stay locked briefly for safety reasons. When should I book a service for E40?If the door closes correctly but the error continues.

What Zanussi recommends

Issue

  1. Washing machine displays error message E40 or E41, or emits 4 beeps / 4 flashes
  2. Error codes E41, E42, E43, E44 and E45 on the washing machine

Applies to

  1. Front-loading washing machine / washer-dryer
  2. Top-loading washing machine

Resolution

  1. Push firmly until you hear a click, confirming the lock is engaged
  2. Remove any trapped items
  3. Restart the washing cycle
  4. Remove excess laundry
  5. Try running the cycle again
  6. Disable it using a coin or suitable tool
  7. Refer to your user manual for instructions
  8. Download the manual if needed for step-by-step guidance
  9. The door lock mechanism may be faulty
  10. The appliance may require professional diagnosis and repair

Which appliances this applies to

Documented by Zanussi for its washing machines generally, not for a specific model.

Questions people ask

Frequently asked questions

What does Zanussi E41 mean on a washing machine?

Issue: Washing machine displays error message E40 or E41, or emits 4 beeps / 4 flashes Error codes E41, E42, E43, E44 and E45 on the washing machine.

How do I fix Zanussi E41?

Issue: 1. Washing machine displays error message E40 or E41, or emits 4 beeps / 4 flashes 2.

Sources

Where these facts come from

Every fact on this page was read from the manufacturer's own product page or document at the address shown, and is labelled with how far it has been checked. Last updated 3 November 2026. Read how we source data, or report an error.