Siemens

Siemens washer dryers

3 models with specifications and official manuals, 5 error codes explained and 0 documented problems, all from Siemens's own documents. Find the model number on the rating plate inside the door or on the back panel.

Models

Models

iQ500

iQ700

Error codes

Siemens washer dryer error codes

CodeMeaningApplies to
E:10 -00 The pump for the intelligent dosing system is blocked. 1. Clean the detergent drawer. 2. If the fault persists, call customer service. Note: Until … 1 model
E:30 Critical malfunction. Turn off the water tap. With this error message, the appliance starts a draining process. 1. Wait approx. 5 minutes until the … 2 models
E:35 The appliance is leaking. 1. Turn off the water tap. 2. Call customer service. 1 model
E:36 -10 The detergent solution is not being pumped out. The water outlet hose is connected too high, is kinked or trapped, or has been extended … 1 model
E:36 -25 Drain pump is blocked. Clean the drain pump. 2 models
Manuals

Manuals

16 official Siemens documents are linked from the model pages above. Open a model, then its Manuals page, to reach the manufacturer's PDF.

Where is my model number?

Find the rating plate

Every appliance carries a rating plate: a printed label with the model number, the serial number and the electrical rating. Search this site with the model number exactly as printed; spaces, hyphens and the suffix after a slash do not matter.

  • Washing machines and washer dryers inside the door frame when the door is open, or behind the filter flap at the bottom front.
  • Dishwashers on the edge of the door, visible when it is open.
  • Fridges and freezers inside the compartment, on a side wall or behind the salad drawer.
  • Ovens and cookers on the door frame or the inside edge of the drawer below.
  • Anything else on the back or underside of the appliance.

Bosch, Siemens and Neff label the model number E-Nr; the longer FD number beside it is the production date, not the model.

Questions people ask

Frequently asked questions

What are the Siemens washer dryer error codes?

Siemens documents 5 error codes for its washer dryers in this index, including E:10 -00, E:30, E:35, E:36 -10, E:36 -25. Each code has its own page with the manufacturer's meaning, documented cause and recommended action.