Siemens · Washer dryers · Error code

E:36 -10 Washer dryer error code

What E:36 -10 means on Siemens washer dryers, what Siemens says causes it and what to do, with the models it is documented for.

Source: Siemens manual pdf (PDF), retrieved 3 Nov 2026 Manufacturer-published

All Siemens codes
In short

On Siemens washer dryers, error code E:36 -10 means: The detergent solution is not being pumped out. Recommended action: The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly. Siemens documents it for 1 Siemens model.

What E:36 -10 means

The detergent solution is not being pumped out. The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly. Check the installation of the water outlet hose. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. The drain pump is blocked or the pump cover is not installed correctly. Check that the pump cover is installed correctly. Clean the drain pump. Detergent dosage is too high. If intelligent dosing is activated, reduce the basic dosage. If you dose manually, reduce the amount of deter

What Siemens recommends

The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly. Check the installation of the water outlet hose. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. The drain pump is blocked or the pump cover is not installed correctly. Check that the pump cover is installed correctly. Clean the drain pump. Detergent dosage is too high. If intelligent dosing is activated, reduce the basic dosage. If you dose manually, reduce the amount of deter

Which appliances this applies to

Siemens documents E:36 -10 for 1 model in the index:

  • WN54C2ATGB iQ700 Washer dryer 10.5 kg /6 kg max. 1…

Related sub-codes: E:36 -25

Questions people ask

Frequently asked questions

What does Siemens E:36 -10 mean on a washer dryer?

The detergent solution is not being pumped out. The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly.

How do I fix Siemens E:36 -10?

The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly. Check the installation of the water outlet hose.

Which Siemens models show E:36 -10?

Siemens documents E:36 -10 for 1 model in our index, including WN54C2ATGB.

Sources

Where these facts come from

Every fact on this page was read from the manufacturer's own product page or document at the address shown, and is labelled with how far it has been checked. Last updated 3 November 2026. Read how we source data, or report an error.