Siemens · Washer dryers · Error code

E:10 -00 Washer dryer error code

What E:10 -00 means on Siemens washer dryers, what Siemens says causes it and what to do, with the models it is documented for.

Source: Siemens manual pdf (PDF), retrieved 3 Nov 2026 Manufacturer-published

All Siemens codes
In short

On Siemens washer dryers, error code E:10 -00 means: The pump for the intelligent dosing system is blocked. Recommended action: 1. Siemens documents it for 1 Siemens model.

What E:10 -00 means

The pump for the intelligent dosing system is blocked. 1. Clean the detergent drawer. 2. If the fault persists, call customer service. Note: Until the fault is rectified, you can deactivate the intelligent dosing system and dose manually.

Which appliances this applies to

Siemens documents E:10 -00 for 1 model in the index:

  • WN54C2ATGB iQ700 Washer dryer 10.5 kg /6 kg max. 1…
Questions people ask

Frequently asked questions

What does Siemens E:10 -00 mean on a washer dryer?

The pump for the intelligent dosing system is blocked. 1.

How do I fix Siemens E:10 -00?

1. Clean the detergent drawer.

Which Siemens models show E:10 -00?

Siemens documents E:10 -00 for 1 model in our index, including WN54C2ATGB.

Sources

Where these facts come from

Every fact on this page was read from the manufacturer's own product page or document at the address shown, and is labelled with how far it has been checked. Last updated 3 November 2026. Read how we source data, or report an error.