Siemens washing machine error codes
All 6 Siemens washing machine error codes in the index, with the meaning, documented cause and what Siemens recommends you do. Every entry is taken from Siemens's own documentation; codes are documented per model, range or appliance type, and each code page says which.
| Code | Meaning | Applies to |
|---|---|---|
| E:10 -00 | The pump for the intelligent dosing system is blocked. 1. Clean the detergent drawer. 2. If the fault persists, call customer service. Note: Until the fault is rectified, you can deactivate the … · what to do on the code page | 2 models |
| E:30 | Critical malfunction. Turn off the water tap. With this error message, the appliance starts a draining process. 1. Wait approx. 5 minutes until the draining process ends. 2. Restart the appliance. If … · what to do on the code page | 4 models |
| E:35 | The appliance is leaking. 1. Turn off the water tap. 2. Call customer service. · what to do on the code page | 2 models |
| E:36 -10 | The detergent solution is not being pumped out. The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly. Check the installation of the water outlet … · what to do on the code page | 2 models |
| E:36 -25 | Drain pump is blocked. Clean the drain pump. · what to do on the code page | 4 models |
| E:38 -25 | Drain pump is blocked. 1. Clean the drum. 2. If the fault persists, clean the drain pump. Inlet opening of the rubber gasket is blocked. Clean the inlet opening in the rubber … · what to do on the code page | 2 models |
Frequently asked questions
What does Siemens E:10 -00 mean?
The pump for the intelligent dosing system is blocked. 1. Clean the detergent drawer. 2. If the fault persists, call customer service. Note: Until the fault is rectified, you can deactivate the intelligent dosing system and dose manually.
What does Siemens E:30 mean?
Critical malfunction. Turn off the water tap. With this error message, the appliance starts a draining process. 1. Wait approx. 5 minutes until the draining process ends. 2. Restart the appliance. If required, start the draining process again. 3. If the fault persists, call customer service. Dete.
What does Siemens E:35 mean?
The appliance is leaking. 1. Turn off the water tap. 2. Call customer service.
What does Siemens E:36 -10 mean?
The detergent solution is not being pumped out. The water outlet hose is connected too high, is kinked or trapped, or has been extended impermissibly. Check the installation of the water outlet hose. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose.
What does Siemens E:36 -25 mean?
Drain pump is blocked. Clean the drain pump.
What does Siemens E:38 -25 mean?
Drain pump is blocked. 1. Clean the drum. 2. If the fault persists, clean the drain pump. Inlet opening of the rubber gasket is blocked. Clean the inlet opening in the rubber gasket.